Power Supply: DC12~24V

Please note that this electric lock has an oval cylinder, and its width is 5.8cm. Therefore, the best position to install is at the center of the door leaf (not door frame). Please refer to installation diagram.

Adjustable fail-safe (power to lock) or fail-secure (power to open).

Adjustable to fail-secure (power to open) for high security places. Adjustable to fail-safe (power to lock) for public places.

Built-in door open or door close state detection output point (250mA: N.C./ N.O.).

Suitable for 180° door.

Stainless steel bolt is able to sustain more than 800 kg of shear force.

Adjustable to fail-secure (power to open) to achieve long unlock state function.

Built-in oval cylinder as unlocking device. Use of oval cylinder to unlock when power cut occurred or during emergency.

Built-in photo couplers door open push button input contact. Door will lock again automatically when door is not open within 5 seconds.

Operation temperature: 0~90℃; Humidity: 85%Rh max.

Dimensions:

Body: 200mm(L) x 25mm(W) x 38mm(D)

Strike plate: 90mm(L) x 23mm(W) x 2.5mm(D)

Bolt: 16mm(Throw) x 12.7mm(Diameter)

Weight:750g

Compact all-in-one design and easy to install.

Built-in micro controller with door open delay time and door position detection outputs.

Suitable for all types of 90- or 180-degree open aluminum or wooden doors.

Repeated locking function. Automatic repeated locking (maximum 60 times) when door is not locked at the correct position.

Power Supply: 12V/24V DC (auto-adjusting).

Maximum sheer force of 1200kg (2600 lbs.), maximum magnetic suction up to 5mm (@24V).

Two long locking holes at cater corners of the armature are able to fine adjust both armature and body when they are installed.

Power consumption (Operation current: 900mA; Standby current: 220mA@12VDC / 190mA24VDC).

Operation temperature: 0~90℃; Humidity: 85%Rh max.

Dimensions: Body: 182mm (L) x 30mm (W) x 25mm (D) /Armature: 182mm (L) x 30mm (W) x 23.6mm (D)

Weight:1200g

Certification: CE

3 set of output points to connect other equipment.

only has output point function.SCP-110：

Power supply: DC 12V~DC 24V

Built-in Buzzer status.

Indicator: Dual-color (red and green) .

Red indicator to set blinking, off or on.

Red or green case to select (it is suggested to select red case for fire alarm system and green case for access control system).

Resettable design, SCP-110 obvious indicators around the edges of the unit.

Press the pressing plate to set the red indicator.

Pressing plate with status (green and red) shown.

Reversionary key with non-slip design.

Input power range from DC12-24V to connect with all types of fire alarm system.

Built-in buzzer status to set as silent, interval wailing or continuous wailing. Volume is adjustable.

Easy to assemble, outer case without screws, 3 set of output points to connect other equipment, embedded or surface installations to select.

Dimensions: SCP-100：90 L x 93 W x 45 H (mm)/SCP-110：90 L x 93 W x 45 H (mm)

Weight:SCP-100：192 g，SCP-110：208 g。

SDO-501 : Track set

SDO-501A : Track set , 433MHz remote control included 

SDO-501C : Track set, 2.4G automatic door open tag

SDO-502 : Push arm set

SDO-502A : Push arm set,  433MHz remote control included 

SDO-502C : Push arm set, 2.4G automatic door open tag

Built-in Bluetooth, advanced fine-turning settings using APP interface.

One key to start automatic learning positioning. Easy to install without complicated setting procedures.

Two types of force arm to select to solve the gap between the door frame and the door leaf within 30cm.

Provide automatic self-closing function, without touching the doorknob for accessing move conveniently.

It is available to install on door frame or door leaf. Move flexibility of installation for more complicated.

Optional 2.4G automatic door access control transmitter or 315/433 MHz controller available to purchase to provide long distant door open function.

Centered double-sided output shaft available to select output position according to the environment. Optional door loop to protect external circuit available to purchase.

Chute lever arm using balls shaft to reduce noise and extend its service life. Patented roller design to allow larger installation error or flatness of door leaf and door frame.

SI-10 : single switch, 19mm, polycarbonate fireproof.
SI-12 : single switch, 19mm, stainless steel.
SI-15 : single switch, 22mm, stainless steel.
SI-18 : single switch, 38mm, stainless steel.

Infrared type:
Strong and durable SUS304 stainless steel panel design which resists strong acid and alkali.
SI-10 as mini infrared detector for access control push button auto-control detection.
Suitable for hollow door frame and electrical box use. Voltage :DC12V~24V±10%.
Specially designed to prevent any interference from other infra-red.
The diagram shows world universal use.
The front of the detector is waterproof design.
Adjustable proximity range (4~15cm). Stable proximity range.
Door opening time is able to set Trigger state (0.5~20sec) or Toggle mode output.
Operation temperature range: -10℃~70℃.Humidity 85%Rh max.
Contact rating: 1A@30VDC N.O./N.C. Output.